Sponge Indentation Hardness Testing Machine

Scope of application:

Sponge compression hardness tester, this machine is used to measure the hardness of porous elastic materials. The polyurethane foam sample can be tested according to the national standard, and the compressive hardness of sponge, foam and other materials can be accurately measured. In addition, it can also be used to measure the specified compression hardness of the seat foam (such as backrest, seat cushion foam, etc.), and accurately measure the compression hardness of each foam part of the seat.

Equipment introduction:

Sponge foam collapsible hardness tester is used to test the collapsible hardness of porous elastic materials such as sponge, foam and foam. Sponge foam collapsibility hardness tester refer to GB/T 10807.GB/T 12825.GB/T 18942.1. ASTM D3574. GBT 26392 and other test standards. The sponge foam collapsibility hardness tester is to place the sample between the upper and lower pressure plates, and when the upper pressure plate compreszes the sample of a certain size down to the standard requirement at a specified speed, the load element on it will feedback the induced pressure to the controller for processing and display, so as to measure the product collapsibility hardness.

Product features:

1, the box adopts electrostatic baking treatment, the countertop adopts pure aluminum oxidation treatment, the whole machine design is reasonable, the structure is tight, beautiful and generous:

2, touch screen control and display, simple, convenient and fast operation;

3, automatic zero clearing before the test, automatic return after the test, real-time display of force, current position, test speed and other parameters;

4, with program control and mechanical limit, automatic stop when the load exceeds the rated value.

Product parameter table